Timber Shading Panels
One of NLC latest installations consists of 6 No. timber blade vertical Brise Soleil panels. As shown in the photos the brackets were installed before any of the cladding so the majority of the bracket is hidden leaving only a small stub on show. Rectangular Western Red Cedar blades were used in this system with powder coated aluminium supports.
Individual Solar Shading Panels
Our engineers installed 10 individual solar shading panels in front of the office windows at Aston Manor Brewery to reduce solar gain and glare.
Nationwide Louvre Company recently supplied and installed 4 No. aluminium weather louvres to a new building at West Suffolk Crematorium. Two of the louvre panels were on either side of the building and they both were the same shape but mirror image to suit the shape of both ends of the building. The other two louvre panels were on the front elevation of the building and they both sloped back 65 degrees. Each louvre was split into smaller sections due to the large size of the finished weather louvre but the blades gave a continuous appearance once installed.
NLC supplied, delivered and installed this brise soleil to residential property in the New Forest, Hampshire. This particular shading system consisted of two elevations of brise soleil joined together through the use of a fully welded corner panel.
Two Sided Louvre Screen & Surface Flanged Weather Louvres
NLC recently installed a two sided louvre screen and 11 individual louvre panels to a residential property in London to allow ventilation into a car park.
Vertical Solar Shading
Nationwide Louvre Company recently installed this fantastic vertical aluminium brise soleil system to a new school extension in Lincoln. Vertical box section support sub frame held the NLC-SOL300-E elliptical Brise Soleil blades in position at a 28 degree angle. The Brise Soleil was designed to reduce solar gain and glare through the windows.
Continuous Timber Brise Soleil
NLC’s most recent brise soleil project consisted of the 120mm timber blade system shaped to match the profile of the aluminium 120mm elliptical blade. The timber blades are fixed to powder coated aluminium side frames and held in place by aluminium brackets hidden behind the cladding.
Horizontal Brise Soleil Complete With Welded Corner
This brise soleil project had four identical buildings each with a run of solar shading including a welded corner.
Vertical Brise Soleil
This project was completed by NLC at a leisure centre in Eley. This particular system consisted of 3 elevations with our 120mm elliptical blades split into bays along the front of the building in between the drainpipes. Two welded corner sections joined the main elevation to the side elevations to give a continuous appearance.
Continuous Brise Soleil Run
NLC recently supplied, delivered and installed this continuous run of brise soleil to a school in London.
