The pictures below show vertical timber brise soleil recently supplied and fitted by NLC for an ongoing project on a new care home in Weybridge – There will be more brise soleil to follow!
These brise soleil panels feature western red cedar 145mm elliptical blades fixed into laser cut aluminium side frames.
Here we have a vertical brise soleil project recently supplied and fitted by NLC on residential flats in Blackheath, London.
This project was fabricated using our SOL 150-E elliptical blades fixed onto 100x40mm aluminium box section at 14.4 degrees via our birdbeak brackets.All components were polyester powder coated in 7021 with a matt finish.
Another one of NLC’s recent installations came in the form of horizontal timber brise soleil on a residential property in Northamptonshire.
These panels consisted of western red cedar blades with an elliptical profile.
NLC supplied and installed the Louvre Screen below at Gloucester University.
This louvre was made using our EL75 louvre blade and unlike many of our other jobs the blades were requested in mill finish.
Vertical box section blades (R150) were used for the Brise Soleil panels supplied and fitted by Nationwide Louvre Company at this new care centre in Egerton.
NLC recently installed the Brise Soleil on a residential property which is part of an ongoing housing development project in Cotswold Waters, Fairford.
All panels are factory fabricated and fitted on site by NLC engineers. These solar shading panels were fabricated using our 150mm elliptical blade and finished in polyester powder coating RAL 7016 Semi-Gloss.
The latest louvre to be installed by NLC was for the Western Village Energy Centre in Edinburgh.
This louvre was fabricated using our NLC-EL75 louvre blade and featured birdmesh to the rear of the louvre and two large double doors.
All materials were finished in 7016 Semi-Gloss polyester powder coating.
The pictures below show a horizontal solar shading project recently supplied and installed by NLC on a residential property in Newport.
The solar shading panels were made using our 150mm wide elliptical blade powder coated in 7022 Matt. This particular project featured 5 fully welded corners to allow the panels to run continuously along the face of the building and around the corner.
These runs of solar shading were used on both the ground and first floor of the building to help prevent solar gain through the large windows featured on the property.
